1.  An administrator may choose not to apply Articles 4(2), points (c), (d) and (e) of Article 4(7), Articles 4(8), 5(2), 5(3), 5(4), 6(1), 6(3), 6(5), 7(2), point (b) of Article 11(1), points (b) and (c) of Article 11(2), and Articles 11(3), 13(2), 14(2), 15(2), 16(2) and (3) with respect to its non-significant benchmarks.

2.  An administrator shall immediately notify its competent authority when the administrator's non-significant benchmark exceeds the threshold mentioned in point (a) of Article 24(1). In that case, it shall comply with the requirements applicable to significant benchmarks within three months.

3.  Where an administrator of a non-significant benchmark chooses not to apply one or more of the provisions referred to in paragraph 1, it shall publish and maintain a compliance statement which shall clearly state why it is appropriate for that administrator not to comply with those provisions. The administrator shall provide the compliance statement to its competent authority.

4.  The relevant competent authority shall review the compliance statement referred to in paragraph 3 of this Article. The competent authority may also request additional information from the administrator in respect of its non-significant benchmarks in accordance with Article 41 and may require changes to ensure compliance with this Regulation.

5.  ESMA shall develop draft implementing technical standards to develop a template for the compliance statement referred to in paragraph 3.

ESMA shall submit the draft implementing technical standards referred to in the first subparagraph to the Commission by 1 April 2017.

Power is conferred to the Commission to adopt the implementing technical standards referred to in the first subparagraph in accordance with Article 15 of Regulation (EU) No 1095/2010.

6. ESMA shall develop draft regulatory technical standards to specify the criteria under which competent authorities may require changes to the compliance statement as referred to in paragraph 4.

ESMA shall submit those draft regulatory technical standards to the Commission by 1 October 2020.

Power is delegated to the Commission to supplement this Regulation by adopting the regulatory technical standards referred to in the first subparagraph in accordance with Articles 10 to 14 of Regulation (EU) No 1095/2010.